We replace electrical breaker units that trip, stick or wear out
A breaker that keeps tripping, feels warm or will not reset is telling you something. We find out whether the breaker itself has failed or whether the circuit is the problem, then fit a breaker that suits your panel.
Townside Electric
Licensed electricians
Signs a breaker may need replacing
A breaker that trips is often doing its job. The real question is whether the breaker has worn out or whether something on the circuit is causing the trip. We look at both before recommending a replacement.
It trips with very little running
If a breaker cuts power when only a lamp or a phone charger is on, the breaker, a connection or the wiring may be at fault. Tell us what was running and we test the circuit to find out which.
It feels warm, buzzes or looks discoloured
Heat, a burning smell or a buzzing sound from the panel needs attention. Stop using the affected circuit if you can and call us. We check the breaker and how it connects to the panel.
It is old, damaged or hard to reset
Breakers wear with age, and some older panels use breakers that are hard to find. We confirm what is installed and whether a compatible replacement is available for your panel.
Why the right breaker matters
A breaker has to suit the panel it sits in and the wire it protects. The wrong part can leave a circuit without proper protection, so we confirm the details before we install anything.
Find the cause, not just the symptom
A new breaker will not fix an overloaded circuit or a loose connection somewhere else in the house. We test the circuit so you know whether a replacement solves the problem or whether more work is needed.
A breaker that suits your panel
Panels are built to accept specific breaker types. We check your panel make and labels, then install a compatible breaker sized for the circuit wiring.
Know when the panel is the issue
If several breakers are failing or the panel shows damage, replacing one breaker may not be the best use of your money. We explain your options, including a panel replacement if it makes sense.
How we do it
Here is how a breaker replacement usually runs, from your first call to the final test.
Tell us what is happening
Let us know which circuit is affected, what was running when it tripped and how often it happens.
We inspect the panel
We look at the breaker, the panel and the connections, and check how the circuit behaves under load.
Agree on the fix
We explain whether the breaker, the circuit or the panel needs work and give you a price before we start.
Power down safely
We tell you which circuits will be off and for roughly how long, then isolate the work area.
Install the new breaker
We fit a compatible breaker, secure the wiring connection and confirm the circuit label is correct.
Test and walk you through it
We restore power, test the circuit and show you what we replaced and why.
Why choose Townside?
You should feel comfortable with the people working on your property and understand what you are paying for.
You get a clear plan before work starts
We talk through what you need and explain the work in plain language. You can ask questions and review the quote before you decide.
Your work is in licensed hands
Our electricians check the existing setup and test the work we complete. We include the permit and inspection needs in your plan.
We plan around your space
We agree on access and any planned power shutdowns with you. When the work is finished, we clean the work area and show you what has changed.
Local help
across the Lower Mainland
We help homeowners and businesses in Delta and nearby communities. Choose your area to find out more about our local electrical services.
Questions about replacing an electrical breaker
These answers cover what homeowners usually ask before booking a breaker replacement.
A breaker that will not reset, trips with very little load, feels hot or shows visible damage may need replacing. Frequent tripping can also point to an overloaded circuit or a wiring fault, so we test the circuit before recommending a new breaker.
No. A breaker that trips when the circuit is overloaded is usually protecting your wiring. The fix might be moving an appliance, adding a new circuit or repairing a connection. We explain what we find and what each option involves.
Working inside a panel exposes you to live parts, even with the main breaker switched off. For your safety, we recommend having a licensed electrician handle any work inside the panel.
In many cases, yes. Some older panels use breakers that are hard to find or no longer made. If a compatible replacement is not available, we talk through other options, which may include replacing the panel.
Some or all circuits are usually switched off while we work in the panel. We let you know beforehand so you can plan around your fridge, home office and anything else that needs power.
Ask us about ground fault or arc fault breakers. We check whether your panel accepts them and whether they suit the circuit before we quote the work.
It depends on the work and where you live. Vancouver runs its own electrical permits, while Technical Safety BC covers much of the rest of the Lower Mainland. We confirm what applies to your job and handle the paperwork when a permit is needed.
Switch the affected breaker off if you can reach it safely and stop using that circuit. Do not remove the panel cover. Call us and describe what you noticed so we can discuss the next step.
Tell us which breaker is giving you trouble
Let us know which circuit is affected and what happens when it trips. We will check the panel and quote the replacement before any work starts.